This Is A Custom Widget

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.

This Is A Custom Widget

This Sliding Bar can be switched on or off in theme options, and can take any widget you throw at it or even fill it with your custom HTML Code. Its perfect for grabbing the attention of your viewers. Choose between 1, 2, 3 or 4 columns, set the background color, widget divider color, activate transparency, a top border or fully disable it on desktop and mobile.

Shop

/Shop/
­
  • Sale!

    CRL Clear 3/4″ Vinyl Replacement Washer for 3/4″ Standoff Cap Assembly

    $9.05 $8.98
    Catalog Number: HW058 Provides Protection to Glass Surface Several Sizes Available This CRL 3/4" Replacement Washer is intended to protect glass surfaces between the standoff cap and the standoff base. It is designed to work with 3/4" (19 mm) Standoff Cap Assemblies.
    Add to cartDetails

  • CRL Translucent Vinyl Edge ‘T’ Wipe

    $2.70 – $6.93
    Catalog Number: SDTW , SDTWT2

    • Now Available With or Without Pre-Applied Clear Very Hi-Bond Tape

    • Can Be Used On in or Out-Swinging Doors

    • Suggested Gap: 7/16" (11 mm)

    • Use Monolithic Tempered Glass
    Our CRL Translucent 'T' Shaped Edge Wipe can be used on in or out-swinging doors. Leg Closes gaps up to 7/16" (11 mm), and can be trimmed for smaller gaps. Adhere 5/16" (8 mm) rigid base to either glass edge or wall using our Clear Very Hi-Bond Tape. Minimum order is five lengths. Packing Charge added to orders fewer than 10 combined lengths.  
    Select optionsDetails

  • CRL 24″ Ladder Style Back-to-Back Pull Handles

    $170.54 – $205.73
    Catalog Number: LP240 Extra Height for Unique Shower Door Appearance and Contemporary Design 1-1/4" (32 mm) Diameter Heavy Wall Brass Tubing Use Monolithic Tempered Glass Three Sizes Offered in Four Most Popular Shower Door Hardware Finishes Custom Finishes are Also Available CRL Ladder Style Pulls say "notice me" when mounted to a heavy frameless shower enclosure. The extra height, when compared to typical shower door pull handles, makes for a unique appearance and contemporary design. Ladder Style Pull Handles are for back-to-back mounting using supplied through bolts on 3/8" or 1/2" (10 or 12 mm) thick glass.
    Select optionsDetails

  • Translucent Vinyl Edge ‘T’ Wipe

    $1.45
    Catalog Number: SDTW, SDTWT2 Now Available With or Without Pre-Applied Clear Very Hi-Bond Tape Can Be Used On in or Out-Swinging Doors Suggested Gap: 7/16" (11 mm) Use Monolithic Tempered Glass Our popular CRL SDTW T-Wipe is now available with pre-applied Hi-Bond Tape, for ease of installation and substantial labor savings. Simply peel back the thin tape lining to expose the clear tape. Popular 98" (2.49 m) stock lengths may be shipped UPS.
    Add to cartDetails
  • Sale!

    CRL Soft Fin ‘H’ Wipe for 3/8″ Glass

    $19.95 $17.99
    Add to cartDetails
  • Sale!

    CRL 135 Degree Strike Jamb Seal

    $2.74 – $23.23
    Select optionsDetails

  • CRL ‘Y’ Jamb Seal with Soft Leg for 6mm (1/4″) and 8mm (5/16″) Glass

    $19.85
    Add to cartDetails

  • CRL Single-Sided Cylinder Knobs

    $13.16 – $17.82
    Catalog Number: SDK212

    • Solid Brass Material

    • Requires a 3/8" to 1/2" (10 to 12 mm) Hole

    • Fits 1/4" to 1/2" (6 to 12 mm) Thick Glass

    • Single-Sided Knob Without Protective Plastic Sleeve

    • Use Monolithic Tempered Glass
    This solid brass CRL Cylinder Style Knob comes in many beautiful finishes. Knobs measure 11/16" (17.5 mm) in diameter and stand 1-3/16" (30 mm) from the door surface. Requires a 3/8" to 1/2" (10 to 12 mm) hole in glass for installation.  
    Select optionsDetails

  • CRL Ceiling Mount “Sleeve Over” Glass Clamps

    $10.73 – $14.44
    Catalog Number: S0GC01 For 5/16" to 1/2" (8 to 12 mm) Thick Glass Mounts to Ceiling Use Monolithic Tempered Glass Solid Brass Assists with Shear Forces Holds Glass Panels in Position While Sealant Cures CRL Sleeve Over Glass Clamps are designed to provide a mechanical fastener to cover the shear forces placed on the glass panels. No special fabrication of the glass is required. Can also be used to secure the glass panels in position while the applied silicone sealant in the joint cures (the silicone sealant glues the glass panels together, prevents water leakage, and provides the pull strength to keep the panels from separating). Clamps are secured in place by nylon tipped Allen set screws.
    Select optionsDetails

  • CRL Left Hand “Sleeve Over” Wall Mount Glass Clamps

    $11.95 – $30.80
    Catalog Number: S0GC37L For 5/16" to 1/2" (8 to 12 mm) Thick Glass Use Monolithic Tempered Glass Solid Brass Secured to Glass with Set Screws Assists with Shear Forces Holds Glass Panels in Position While Sealant Cures Left-Handed as Viewed from Outside Shower CRL Sleeve Over Glass Clamps are designed to provide a mechanical fastener to cover the shear forces placed on the glass panels. No special fabrication of the glass is required. Can also be used to secure the glass panels in position while the applied silicone sealant in the joint cures (the silicone sealant glues the glass panels together, prevents water leakage, and provides the pull strength to keep the panels from separating). Clamps are secured in place by nylon tipped Allen set screws.
    Select optionsDetails

  • CRL Translucent Vinyl Bulb Seal for 5/32″ Gap

    $3.52
    Catalog Number: SDTJ, SDTJT2 Most Popular Use is for Hinge Side Seal Bulb Compresses When Door Closes Use Monolithic Tempered Glass Now Available With or Without Pre-Applied Clear Very Hi-Bond Tape Translucent Vinyl Bulb Seal can be used on inswing or outswing doors. Cat. No. SDLB closes gaps from 3/16" (5 mm) to 3/8" (10 mm). Cat. No. SDTB closes gaps from 5/32" (4 mm) to 7/32" (5.6 mm). Cat. No. SDTJ closes gaps from 1/8" (3 mm) to 5/32" (4 mm). Adhere rigid flat base to glass edge or wall using our Clear Very Hi-Bond Tape.
    Add to cartDetails

  • One-Piece Bottom Rail with Clear Wipe

    $25.09 – $25.89
    Select optionsDetails
Copyright 2016 ShowerHardware.com | All Rights Reserved | Powered by Lync SEM