-
Sale!
CRL Cardiff 05 Right Hand
$77.95 – $298.45 -
CRL Translucent Vinyl Bulb Seal
$18.27 – $21.68Catalog Number: PCR10, PCR8 98" (2.49 m) Stock Length Can Be Used on Inswing and Outswing Doors Suggested Gap: 1/4" (6 mm) Use Monolithic Tempered Glass The CRL Clear Polycarbonate 'U' with Bulb Attachment is a versatile seal that can be mounted to the edge of a door or panel for a variety of installation configurations. The soft Bulb portion of the Seal allows doors to swing both in and out of the enclosure if desired. -
CRL 135 Degree “Sleeve Over” Glass Clamps
$21.41 – $35.90Catalog Number: S0GC135 For 5/16" to 1/2" (8 to 12 mm) Thick Glass Solid Brass Use Monolithic Tempered Glass Assists with Shear Forces Holds Glass Panels in Position While Sealant Cures CRL Sleeve Over Glass Clamps are designed to provide a mechanical fastener to cover the shear forces placed on the glass panels. No special fabrication of the glass is required. Can also be used to secure the glass panels in position while the applied silicone sealant in the joint cures (the silicone sealant glues the glass panels together, prevents water leakage, and provides the pull strength to keep the panels from separating). Clamps are secured in place by nylon tipped Allen set screws. -
Catalog Number: CMC1 Tall Base Allows Larger Gap Between Glass and Mounting Surface Heavy-Duty Solid Brass Construction For Use with 3/8" and 1/2" (10 and 12 mm) Thick Tempered Glass Stocked in Polished Chrome, Satin Chrome, Polished Nickel, Brushed Nickel, and Oil Rubbed Bronze 3/4" (19 mm) Diameter Hole Required in Glass The CRL Tall Base Glass Clamp has an exceptionally high 1" (25 mm) base, thus allowing a large gap between the glass and mounting surface if desired. While primarily for ceiling mount applications, this Clamp may mount to other surfaces as well. The Tall Base Glass Clamp is constructed of heavy-duty solid brass, and is stocked in six popular finishes. Custom finishes are available. This Clamp is for use with 3/8" and 1/2" (10 and 12 mm) thick tempered glass. A 3/4" (19 mm) diameter hole is required in the glass.
-
CRL 135 Degree Movable Transom Clamps
$41.21 – $198.41Catalog Number: GCB335 For 5/16" to 1/2" (8 to 12 mm) Thick Glass Use Monolithic Tempered Glass Glass Transom Swivels to Allow Release of Steam Can Be Used in Conjunction with Other CRL Movable Transom Clamps These CRL Clamps can also be used in combination with our Wall Mount Movable Transom Clamp (Cat. No. GCB186), or our 180 Degree Glass-to-Glass Movable Transom Clamp (Cat. No. GCB188). The movable transom and the door should be square cut, while the fixed panel using the 135 Degree Movable Transom Clamp should be mitered at 45 degrees. Clamp should be centered on glass for optimum performance. Replacement parts are Cat. Nos. 90295A120 (Nylon Washer), 193004 (Nylon Lock Nut), 211039 (Flat Head Screw), and UCG77 (Gaskets). -
CRL Replacement Washers for Back-to-Back Pulls
$8.93 – $101.94 -
Sale!
Vienna Hinge and Handle Set
$102.49 – $138.99Catalog Number: V1ES3 Hinges for 5/16" to 1/2" (8 to 12 mm) Glass Set Includes Two Hinges and One Set of Pull Handles Our Five Most Popular Hinge Series Our Four Most Popular Finishes Our Best-Selling Pull Handle or Knob All Together in Easy-to-Order Sets Use Monolithic Tempered Glass This CRL Shower Pull and Hinge Set consists of one set of BM6X6 Tubular Back-to-Back Pull Handles with metal washers, and two each Vienna 037 Series Wall Mount Hinges. We've made it even easier for you to get two of our most popular Hinges and our best-selling Pull Handle or Knob by combining them in one easy-to-order set. -
CRL Back-to-Back Cylinder Knobs
$8.90 – $17.09Catalog Number: SDK112-
Solid Brass Material
- Requires a 3/8" to 1/2" (10 to 12 mm) Hole
-
Fits 1/4" to 1/2" (6 to 12 mm) Thick Glass
-
Back-to-Back Knob Without Protective Plastic Sleeve
- Use Monolithic Tempered Glass
-
-
Sale!
CRL Single-Sided Contemporary Knobs
$13.41 – $45.20Catalog Number: SDK206-
Solid Brass Material
- Requires a 1/2" (12 mm) Hole
-
Fits 1/4" to 1/2" (6 to 12 mm) Thick Glass
-
Single-Sided Knob
- Use Monolithic Tempered Glass
-
-
CRL Beveled 180 Degree Glass-to-Glass Clamps
$35.00 – $52.30Catalog Number: BGC180 For 3/8" to 1/2" (10 to 12 mm) Thick Glass Used to Secure Fixed Panels of Glass for Frameless Shower Enclosures Solid Brass A Nice Option to More Traditional U-Channel, in that the Clamps Help the Appearance of an 'All-Glass' Look Glass Fabrication Required to Accommodate Clamps Use Monolithic Tempered Glass CRL's Beveled 180º Glass-to-Glass Clamps have attractive beveled edges, and are used to connect two fixed 5/16" to 1/2" (8 to 12 mm) glass fixed transom or inline panel installations in frameless shower enclosures. They feature solid brass construction and a variety of finishes to match our complete line of door hinges and clamps. These clamps are typically used in custom wall partitions, transoms, showcases, trophy cases, and 'all-glass' enclosures. They will instantly add a look of quality to the appearance of your project. Drawings and templates for all Clamps are available. -
Geneva 135º Pony Wall Mount Hinge
$56.70 – $77.80